Results 1 to 2 of 2

Thread: 1984 Jeep CJ-7 Juggy

  1. #1
    Uomo balls
    Join Date
    Jul 2013
    San Antonio
    Liked 12 Times in 12 Posts

    1984 Jeep CJ-7 Juggy

    1984 Jeep CJ 7 juggy

    AMC 401 eng.
    Forged crankshaft and connection rods
    Internally balanced
    Heads milled & pocket cuts on valves
    Block decked
    High pressure & high volume oil pump
    Oil pick-up tube modified to prevent oil starvation on vertical climbs
    Crane RV cam
    Elderbrock performer 4 barrel intake manifold
    Complete eng. Overhaul by Duffin Eng. Shop
    Mean-Green HIGH TORQUE starter

    M. O. R. E. OFF ROAD solid motor mounts
    Four core radiator with chevy 454 fan clutch and aluminum shroud
    COOL FLOW High flow water pump
    Accel high output ign coil

    Propane system
    Impco 450 four barrel carb and impco regulator
    Balanced and tuned by Tim Westerdale
    5 tanks total

    Sunray Engineering Chevy dana 60
    Full Detroit locker
    Moser 35 spline chromemoly inner axle shafts
    Yukon 35 spline outer chromemoly axle shafts
    Warn lock-out hubs
    Crane heavy-duty front cover
    5:38 ratio
    Sun Ray high steer arms and narrowed housing with tie rod assy. Behind diff.

    Sunray Engineering Ford 9 "
    Housing shaved and narrowed by Sunray
    Full spool
    35 spline Moser chromemoly axle shafts
    9” Nodular case

    727 transmission built by Gary Howard
    RV torque converter [1200 RPM fully loaded]
    Clutches , Bands and sprag clutches up-dated
    Reworked valve-body
    Dash mounted Transmission temperature gauge
    Lokar transmission shifter
    Remote cooler with fan

    Atlas Transfer case 4.3 ratio W/32 splines
    Atlas cable shifters

    PSC Hydro assist steering kit
    Steering Box
    Power steering pump
    Steering cylinder
    Reservoir with filter
    Flaming River stainless steering shaft

    Vanco hydro-boost Brake system
    Front Chevy ton disc brakes
    Ford drums brakes on rear

    15” Trailready Beadloks
    39.5 Iroks

    Rear suspension -Single triangulation 4 link rear with coil springs
    Front BDS leaf springs
    Wheelbase is 114”

    MasterCraft Rubicon Seats
    4 point harnesses

    This jeep was built from a stock CJ by the previous owner.
    Same gentleman built and meticulously maintained it for the last 20+ yrs with a strong attention to detail. It is a very solid rig with some bumps and bruises as seen in the pics.

    Price is $ 9,000
    Located East of San Antonio Tx
    Call or text with questions
    [FONT=Verdana]210 three six five 7860

    Trying to post pics��
    Attached Images Attached Images
    Last edited by bfrazier; 07-29-2019 at 01:30 AM.

  2. #2
    Uomo balls
    Join Date
    Jul 2013
    San Antonio
    Liked 12 Times in 12 Posts
    Bump for price drop


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts