• Becoming a contributing member to Rock Krawler gives you these additional benefits.


    * A Custom Rock Krawler Icon Under Your Name.
    * A Custom Title Under Your Name.
    * Ability to Upload Avatars.
    * Ability to Post Attachments.
    * Can have 500 Private Messages.
    * Participate in Rock Krawler Member Giveaways.
    * Supporting a Great and growing Site.


    To become a RK Contributor, click here http://www.rockkrawler.org/payments.php

Goat Built LJ Chassis build

Big4x4ride

Moderator
Joined
Jul 10, 2013
its a Holley Terminator X kit. minus the handheld. they have been on Backorder forever....
I have a guy I've been working with on some remote tuning when the time comes if you're interested. I am a little leary diving in and trying to tune it all myself from the get go. I've been able to learn just enough to get myself in trouble lol.
 

OleCoot

Administrator
Staff member
Joined
Jul 8, 2013
I have a guy I've been working with on some remote tuning when the time comes if you're interested. I am a little leary diving in and trying to tune it all myself from the get go. I've been able to learn just enough to get myself in trouble lol.
Thanks, when I get to that point I'll give ya a holler if I run into troubles :beer:
 

OleCoot

Administrator
Staff member
Joined
Jul 8, 2013
Front bumper came in... :smokin:

Also, has anyone tapped the vent hole in a 14 bolt to run a longer vent hose. ? if so, share the details.
 

Attachments

  • 20210610_162345.jpg
    20210610_162345.jpg
    240 KB · Views: 4
  • 20210610_162350.jpg
    20210610_162350.jpg
    216.5 KB · Views: 4
  • 20210610_190718.jpg
    20210610_190718.jpg
    166.4 KB · Views: 4

OleCoot

Administrator
Staff member
Joined
Jul 8, 2013
Are you sure yours isn't threaded? I think mine was threaded and I just got a nipple that was the same thread pitch and diameter.
I have not checked. That'll be cool if it already is. :smokin:
 

OleCoot

Administrator
Staff member
Joined
Jul 8, 2013
Simple green and the power washer did good :smokin:
 

Attachments

  • 20210616_133434.jpg
    20210616_133434.jpg
    2.9 MB · Views: 4

OleCoot

Administrator
Staff member
Joined
Jul 8, 2013
Fitting the Goatbuilt rear axle truss on my 14 bolt. Couple more pieces to trim and its ready to be tacked and finish welded. My #motobilt 13 bolt diff cover should be here Tuesday. Not long and I can set it up under the chassis, and set pinion angle and lower link mounts.
 

Attachments

  • 20210619_101257.jpg
    20210619_101257.jpg
    208.5 KB · Views: 3
  • 20210619_101308.jpg
    20210619_101308.jpg
    288.8 KB · Views: 3
  • 20210619_113749.jpg
    20210619_113749.jpg
    258.4 KB · Views: 3
  • 20210619_113912.jpg
    20210619_113912.jpg
    281.7 KB · Views: 3

OleCoot

Administrator
Staff member
Joined
Jul 8, 2013
Finished welding the rear truss, next step is tack to housing and put it under the chassis for proper degree and upper link measurements.

Bonus video of me waiting while the welds cool....


 
Last edited: