• Becoming a contributing member to Rock Krawler gives you these additional benefits.


    * A Custom Rock Krawler Icon Under Your Name.
    * A Custom Title Under Your Name.
    * Ability to Upload Avatars.
    * Ability to Post Attachments.
    * Can have 500 Private Messages.
    * Participate in Rock Krawler Member Giveaways.
    * Supporting a Great and growing Site.


    To become a RK Contributor, click here http://www.rockkrawler.org/payments.php

It's fixing to get real

Ramman84

Well-known member
Joined
Aug 3, 2013
The return spring comes with the machined version of the kit which ended up being 20 bucks cheaper than the welded version of the formed kit

Sent from my SCH-I545 using Tapatalk
 

Big4x4ride

Moderator
Joined
Jul 10, 2013
I need the return spring, I bought the weld kit when I got mine.


Sent from my iPhone using Tapatalk
 

Ramman84

Well-known member
Joined
Aug 3, 2013

Bought my air/Hydro ram and casters unfortunately the casters were wrong size. But I did get the ram mounted on the bender. :eek: now I do have a 4 foot section of 1.75 dom I am going to bend sunday to make a cheater angle finder.
I super giddy right now :p :D :cool: the instructions were a little vague or I'm illiterate, but thanks to the pictures I got it done.

Sent from my SCH-I545 using Tapatalk
 

Big4x4ride

Moderator
Joined
Jul 10, 2013
It's a return spring so that you don't have to push the jack back down/in after each bend.


Sent from my iPhone using Tapatalk
 

Ramman84

Well-known member
Joined
Aug 3, 2013
could not wait I bent a couple pieces today, works great, the first bend in the first hole ram fully extended makes a 67 degree bend the return spring ( covered in black nylon sheath) works great so does the machined thumb knob provided with the kit. I figured out that every 10 degrees cost me roughly 1 inch of tube

Sent from my SCH-I545 using Tapatalk
 

Ramman84

Well-known member
Joined
Aug 3, 2013
And now it doesn't need to be bolted down

Sent from my SCH-I545 using Tapatalk